Very happy with how the TAM printer prints with Ninjaflex. This is my first print with this material, and I obviously have some tweaking to do (probably temperature and retraction settings) but still, very happy to have my first print with "best guess" settings turn out entirely workable! Cool!
First print with Ninjaflex flexible filament
Moderator: Elijah
Re: First print with Ninjaflex flexible filament
Looks like I can only upload a few pictures at a time...here are some more.....
Re: First print with Ninjaflex flexible filament
Printed at 240 degrees, 20mm/sec print speed, .84 retraction @ 40mm/sec retraction speed
To stop the blobbing and strings, I would probably try next time to up the retraction to 2mm@50mm/sec and drop the temperature to 230 to see how that worked....
To stop the blobbing and strings, I would probably try next time to up the retraction to 2mm@50mm/sec and drop the temperature to 230 to see how that worked....
Re: First print with Ninjaflex flexible filament
Very cool, thanks for the pics. Glad to see it works quite well. Is that with a stock G2 extruder?
Re: First print with Ninjaflex flexible filament
Yep, with fan full on, printed on gluestick.
Re: First print with Ninjaflex flexible filament
looks great, how tough is it?
Re: First print with Ninjaflex flexible filament
"pretty darn"
I don't thin I could rip it apart, no matter from any vector I would try.....well "maybe" the thing walls if I pulled in the direction to shear with the lay-by-layer process, but is is pretty strong.
I don't thin I could rip it apart, no matter from any vector I would try.....well "maybe" the thing walls if I pulled in the direction to shear with the lay-by-layer process, but is is pretty strong.
Who is online
Users browsing this forum: No registered users and 3 guests