I made a dry storage and feed box for my filament that sits beside the printer. This way I can keep unused filament clean and dry and easy to change over to a different type. This is an 80qt. Sterilite air tight box with a steel rod to support 4 spools (could fit 5 regular spools). Feed through flanges pass the filament outside to a shared filament guide tube that feeds into the back of the printer enclosure. Inside the enclosure frame is a filament filter. On the box lid are some open cell foam blocks that create some drag on the spools to prevent over rotation and unspooling of the filament:
or link if the image won't load for you:
https://drive.google.com/open?id=0B89_D ... XFhTVR6V00
I have a YouTube playlist with the step by step videos and all the various components called out in the video description:
https://youtu.be/xzPvQJxFql0?list=PLpY2 ... YHcbzAiKvj
So far it's working very well, no jams and the relative humidity inside the box stays around 20% day and night.
Share any mods you have made and the awesome results.
1 post • Page 1 of 1
Who is online
Users browsing this forum: No registered users and 1 guest