Type A Machines 2014 Series 1 (White Metal)

Discussion about the Series 1 design files, etc.

Moderator: Elijah

Matthew
Posts: 126
Joined: Wed May 14, 2014 12:40 pm

Type A Machines 2014 Series 1 (White Metal)

Post: #9427 Matthew
Thu Oct 15, 2015 11:23 am

These are the source files for the Type A Machines 2014 Series 1 (1st Gen white metal)

Arduino firmware (G2 hot end) : https://bitbucket.org/typeamachines/ser ... -06-26.zip

Arduino firmware (G1 hot end) : https://bitbucket.org/typeamachines/ser ... -06-26.zip

BeagleBone Black SD card image : viewtopic.php?f=12&t=1728

Printed Parts (2015 upgrade!) : https://github.com/typeamachines/s1-qc-prints
I'm from support. I'm here to help.

dmkilgo
Posts: 8
Joined: Tue Oct 06, 2015 2:44 pm

Re: Type A Machines 2014 Series 1 (White Metal)

Post: #10442 dmkilgo
Tue Aug 23, 2016 1:33 pm

Can we get the "Printed Parts" files in a more CAD friendly format? Something like STEP, Parasolid, IGES, etc... Thanks!

dmkilgo
Posts: 8
Joined: Tue Oct 06, 2015 2:44 pm

Re: Type A Machines 2014 Series 1 (White Metal)

Post: #10446 dmkilgo
Thu Aug 25, 2016 3:07 pm

I got a few STEP files by emailing support. I compressed them using 7-Zip, which I don't know much about. Hopefully you can unzip them.
Attachments
printable parts.7z
(53.35 KiB) Downloaded 25 times


Return to “The Source”

Who is online

Users browsing this forum: No registered users and 1 guest