Cura on Ubuntu 16.04 LTS - Stuck on splash screen

Discuss Cura Type A, our fork of the Cura slicing software, here. Unstable releases may be made available in this section.

Moderator: Elijah

Posts: 4
Joined: Sat Feb 27, 2016 6:16 am

Cura on Ubuntu 16.04 LTS - Stuck on splash screen

Post: #10746 sawozny
Mon Feb 20, 2017 10:07 am

So, I installed the Cura 1.4.1 found in ... _amd64.deb with "sudo dpkg -i ./Downloads/cura_1.4.1-debian_amd64.deb" followed by "sudo apt-get install -f" to fix any dependencies. Then I click on the Ubuntu Button / BFB and type "Cura" which dutifully presents me the application option to click on. When I do so, the Cura Type A Machines orange splash box comes up, bu the application itself never launches. I currently have a workaround bouncing STLs off a Windows install and using it to get GCode onto my S1P, but I'd like a 1 box solution where I run my FreeCAD instance.

Anybody else run into this? Did I do something wrong? Any suggestions where to go looking through logs for the culprit (aside from the standards which I, admittedly, haven't done yet in the hopes somebody has already seen this and knows the fix)?



Return to “Cura Type A”

Who is online

Users browsing this forum: No registered users and 1 guest