Cura Type A 1.5 Public Beta

Discuss Cura Type A, our fork of the Cura slicing software, here. Unstable releases may be made available in this section.

Moderator: Elijah

Trilo
Posts: 10
Joined: Tue May 03, 2016 2:59 pm
Location: San Francisco, California
Contact:

Cura Type A 1.5 Public Beta

Postby Trilo » Wed May 18, 2016 1:56 pm

For those who may have missed it, a new post on the official blog has all the info - Cura Type A 1.5 Public Beta is now available.

kwardle
Posts: 13
Joined: Tue Apr 29, 2014 4:25 pm

Re: Cura Type A 1.5 Public Beta

Postby kwardle » Wed Jun 15, 2016 7:16 am

Why is there no Linux version?

Isolt
Posts: 1
Joined: Fri Jun 17, 2016 8:58 pm

Re: Cura Type A 1.5 Public Beta

Postby Isolt » Fri Jun 17, 2016 10:32 pm

I like to print solid objects to calibrate my flowrate. Is there any way to print solid objects? Setting the infill distance to 0mm doesn't seem to achieve this.

jarhead
Posts: 53
Joined: Sun Mar 15, 2015 5:35 pm

Re: Cura Type A 1.5 Public Beta

Postby jarhead » Sat Jun 18, 2016 5:53 am

Isolt wrote:I like to print solid objects to calibrate my flowrate. Is there any way to print solid objects? Setting the infill distance to 0mm doesn't seem to achieve this.


Set it to the width of your extruder. ie .4mm

On the bottom there's an Information area. It'll give you the infill percent equivalent.


Return to “Cura Type A”

Who is online

Users browsing this forum: No registered users and 1 guest