Cura-1.99

Discuss Cura Type A, our fork of the Cura slicing software, here. Unstable releases may be made available in this section.

Moderator: Elijah

mrSEADEMON
Posts: 140
Joined: Fri Apr 18, 2014 9:35 am
Location: BY Minsk

Cura-1.99

Postby mrSEADEMON » Tue Feb 16, 2016 7:32 am

I use this program. Print quality is good. And good settings.
In the attached application settings file for our printer.
http://software.ultimaker.com/Cura_closed_beta/15.10/
Image
Type A machnines Cura 1.99 resources.rar
(40.68 KiB) Downloaded 91 times

tamseries1.json
c:\Program Files\Cura 1.99\resources\machines\

tam_series1.STL
c:\Program Files\Cura 1.99\resources\meshes\

Elijah
Site Admin
Posts: 767
Joined: Wed Oct 10, 2012 6:33 pm

Re: Cura-1.99

Postby Elijah » Mon Feb 22, 2016 2:36 pm

Very Nice!
Elijah Post
Type A Machines

mrSEADEMON
Posts: 140
Joined: Fri Apr 18, 2014 9:35 am
Location: BY Minsk

Re: Cura-1.99

Postby mrSEADEMON » Wed Feb 24, 2016 1:30 am

thanks.
I'm still working with the settings. Therefore, I will upload an update.

mrSEADEMON
Posts: 140
Joined: Fri Apr 18, 2014 9:35 am
Location: BY Minsk

Re: Cura-1.99

Postby mrSEADEMON » Fri Feb 26, 2016 12:57 pm

for Cura 1.5.04.4
Cura_type A series 1 ABS best paramiter.rar
(2 KiB) Downloaded 92 times

it's for ABS print
for PLA change tempriche

WestyOneDesign
Posts: 3
Joined: Thu Apr 21, 2016 7:13 am

Re: Cura-1.99

Postby WestyOneDesign » Fri Apr 29, 2016 10:09 am

Wow... did this profile work great! I though all was lost with ABS until I loaded this.
Thanks for sharing!
Bob J


Return to “Cura Type A”

Who is online

Users browsing this forum: No registered users and 1 guest