Modification of the printer. Replacement parts axis X. Change Fans systems

A space for working on issues specific to Series 1. Includes Beta groups and production machines.

Moderator: Elijah

mrSEADEMON
Posts: 140
Joined: Fri Apr 18, 2014 9:35 am
Location: BY Minsk

Modification of the printer. Replacement parts axis X. Change Fans systems

Postby mrSEADEMON » Sat May 17, 2014 11:33 pm

Change X axe parts
Image

SolidWorks model - https://www.dropbox.com/s/lr6koa7yw9kzh3n/Gantry%202015%20revNew.rar?dl=0
Image
Image
look at the distance between the motor and the belt
https://youtu.be/85hIH9_RXf8 video.
https://www.dropbox.com/s/ar5c9e4fl1ikz1j/Gantry2015rev2.rar?dl=0
Replace this part eliminates the problem of damage to the belt axis Y. Eliminates vibrations from the friction of the belt on the motor mount.

Web camera Logitech C270 mount
Image
Image
Image
http://www.thingiverse.com/thing:1414670

First you need uninstalold hot end
Image

then instal you new E3D v6 hot end
Image

I use FAN1 to blow E3D. Fan0 to blow hotend
Image
Image

Connect Fans
Image

fans system can download and print from this link http://www.thingiverse.com/thing:418561
with this fan system i print ABS withaut hot bed.
if need i can give ini files for Cura.
and use this
Image


for small central Fan I use this http://ru.aliexpress.com/item/DC-Buck-Converter-with-Voltmeter-Ammeter-Display-Voltage-Regulator-090460/555277897.html
small fan starting working when printer ON. Use 12V
To Blow Rumba i use 120x120 Fan. The Rumba need good fan system. When I use Rumba card without blowing . Rumba burned!!!
Image


then uninstal spring
Image

bolts for securing the Z-axis calibration must use of the composition.
Image

And calibrate Z axy

Then printing
Image

for Dust clianer Filament I use http://www.thingiverse.com/thing:153807
Image

Image
For best print quality, eliminate vibration. You must press the springs on the bed. Or remove the spring from the bed.

change glass to the mirror (better calibration)
Image

Add glass box.
Image

Add lazer cuter
Image

HotBead
http://alirubber.en.alibaba.com/product/1784438536-213715599/Flexible_Kapton_Heater_24v_300mmx300mm_350w_For_3D_Printer.html?edm_src=sys&edm_type=fdbk&edm_grp=0&edm_cta=read_msg&edm_time=realtime&edm_ver=e
Image
Image
if you need upgrade with oficial firmware
hotbed-
https://ru.aliexpress.com/item/Silicone-heating-pad-heater-220V-600W-300mmx300mm-for-3d-printer-heat-bed-1pcs/32591046539.html
and
relay-
https://ru.aliexpress.com/item/solid-state-relay-SSR-40DA-40A-actually-3-32V-DC-TO-24-380V-AC-SSR-40DA/1149707666.html
connector
https://ru.aliexpress.com/item/solid-state-relay-SSR-40DA-40A-actually-3-32V-DC-TO-24-380V-AC-SSR-40DA/1149707666.html
connect instruction - change in firmware termistor 13 to 1
Image
Image
Image

Antidrop filament
Image
Image
http://www.thingiverse.com/thing:989592

New Pulleys. New spool narrower. Fixes an issue with the belt rubbing on the other side of the printer. Make the belt tension more evenly. Stow effect on the walk belt spool. Improve the quality of the print model. Removing layers of festivities along the axes.
http://www.thingiverse.com/thing:916914
Image

Now printer can print ABS withaut hot bed. Without delamination and deformations model.

Change drivers to TMC2100 all lag withaut 1-3 CFG lag
with this driver need inwert all axes and 1.14 V on drivers
Image
Image

Change motors (X, Y, Extruder) to Nema 14 High Torque Stepper 1.5A 40Ncm(56.7oz-in) 14HS20-1504S
Image
Image



sorry for my english.
Attachments
filament_guide_2.rar
(216.03 KiB) Downloaded 55 times
Last edited by mrSEADEMON on Sun Apr 02, 2017 2:45 pm, edited 53 times in total.

Matthew
Posts: 126
Joined: Wed May 14, 2014 12:40 pm

Re: Small fan upgrade

Postby Matthew » Wed Jun 11, 2014 5:16 pm

How's the fan guide working out? Any improvement is prints?

-matthew-
I'm from support. I'm here to help.

Backinthelab
Posts: 99
Joined: Thu Nov 07, 2013 9:55 pm

Re: Small fan upgrade

Postby Backinthelab » Tue Jul 01, 2014 7:04 am

I'm printing that right now, will let you know.
"Hey, I came here to be drugged, electrocuted, and probed...not insulted." -HJS

Backinthelab
Posts: 99
Joined: Thu Nov 07, 2013 9:55 pm

Re: Small fan upgrade

Postby Backinthelab » Tue Jul 01, 2014 10:51 am

Well, lesson learned, check the dimensions before printing. I currently am running a MakerGear heatcore and this won't work as the side airflow tubes get in the way. Should work well with the OEM heatcore and it printed very nicely even with all of the overhangs.
"Hey, I came here to be drugged, electrocuted, and probed...not insulted." -HJS

mrSEADEMON
Posts: 140
Joined: Fri Apr 18, 2014 9:35 am
Location: BY Minsk

Re: Small fan upgrade

Postby mrSEADEMON » Thu Aug 21, 2014 1:08 am

after two time death hotend i change hotend to E3D v6 and print new Fan.
All work perfect http://www.thingiverse.com/thing:418561

MHKAP
Posts: 15
Joined: Wed Jul 16, 2014 12:43 pm

Re: Small fan upgrade

Postby MHKAP » Fri Aug 22, 2014 8:46 am

I was looking at those hotends for our printer. Did you get the universal hot end? I noticed that they also have one with the Bowden extras. How was the process of installing?

jd_3d
Posts: 629
Joined: Fri Nov 09, 2012 12:30 pm

Re: Small fan upgrade

Postby jd_3d » Fri Aug 22, 2014 10:39 am

mrSEADEMON wrote:after two time death hotend i change hotend to E3D v6 and print new Fan.
All work perfect http://www.thingiverse.com/thing:418561


Wow! How are you running 3 fans on that setup? I thought the board only supported 2 max?

mrSEADEMON
Posts: 140
Joined: Fri Apr 18, 2014 9:35 am
Location: BY Minsk

Re: Small fan upgrade

Postby mrSEADEMON » Sat Aug 23, 2014 9:02 am

This hot end longe and need calibrate Z. You need to remove the spring from Z. For instal this hotend change standart hotend (E3D universal hotend). It has diameter like standart Series 1 hotend. 2 fan work together from 4 cable from one connecter. And work perfect. And small use cabel from AC. It start work when printer on. And working all time.

MHKAP
Posts: 15
Joined: Wed Jul 16, 2014 12:43 pm

Re: Small fan upgrade

Postby MHKAP » Wed Aug 27, 2014 9:07 am

Did you get the 12V or 24V hot end?

mrSEADEMON
Posts: 140
Joined: Fri Apr 18, 2014 9:35 am
Location: BY Minsk

Re: Small fan upgrade

Postby mrSEADEMON » Wed Aug 27, 2014 9:05 pm

i use 12V hot end.
But i have cartrige 24V and 12V


Return to “Series 1”

Who is online

Users browsing this forum: No registered users and 1 guest