Printing with Taulman t-glase

All general topics and questions.

Moderator: Elijah

Posts: 6
Joined: Mon Mar 17, 2014 8:29 pm

Printing with Taulman t-glase

Postby james » Wed Apr 22, 2015 7:45 am

hello fellow TAM users. has anyone had success printing with taulman's t-glase? i can't for the life of me get a good print started. filament extrudes very easily (printing at 220), but when i start my print, nothing makes it out and onto the base plate until well into the second layer. this obviously presents a significant challenge to maintaining the print stability.

i have tried re-running the print at temperatures from 218 up to 235, all with the same issue. i have no issues running the print with PLA (also at 220).

is there some setting i am neglecting to change when switching to t-glase?

Posts: 36
Joined: Wed Oct 23, 2013 7:00 am

Re: Printing with Taulman t-glase

Postby BillDempsey » Fri Jun 12, 2015 8:37 am

I haven't purchased my TAM S1 Pro, yet. But on my other printers, I've had better results printing T-glase at 245c.

Bill Dempsey
3-D printing enthusiast, maker, designer, and general tech geek.
Currently own a Type A Machines Series 1 Pro and Ultimaker 2.
Donated my Ultimaker original and CubeX Trio to my local maker space.

Posts: 1
Joined: Mon Jun 29, 2015 7:11 pm

Re: Printing with Taulman t-glase

Postby JeffC » Wed Nov 11, 2015 1:22 pm

Has anyone tried printing light-pipes with Taulman t-glase?
I loaded the config for t-glase into cura for the TAM S1 and followed the suggestions given on the Taulman website for printing light-pipes here:
The results for the light-pipe I printed where only moderately succcessful. Mainly I couldn't get the top and bottom layers to print as a solid strands from end-to-end as shown on the link above.
Does anyone have any suggestions on things to try? I appreciate any help with this. Thanks.

Posts: 126
Joined: Wed May 14, 2014 12:40 pm

Re: Printing with Taulman t-glase

Postby Matthew » Fri Nov 20, 2015 10:02 am

Hi Jeff,

Can you post pictures of your printing results? Also, what temperatures and other settings did you use?

I'm from support. I'm here to help.

Return to “General Discussion”

Who is online

Users browsing this forum: No registered users and 1 guest