Search found 59 matches

by Fast one
Sat Aug 20, 2016 2:36 pm
Forum: Series 1
Topic: Heated bed connector
Replies: 4
Views: 1493

Re: Heated bed connector

Will they sell you the connectors?
by Fast one
Thu Aug 11, 2016 7:22 am
Forum: Mods
Topic: Rollers and Leds on extruder
Replies: 0
Views: 7988

Rollers and Leds on extruder

I added a top roller with ball bearings to the extruder. http://i206.photobucket.com/albums/bb46/hiltonny/3d%20printer/IMG_2468_zpsxyfdzvzn.jpg . Six surface mount leds were mounted at the bottom of the rear extruder fan and wired in parallel with it, this is the view looking up from the bottom: htt...
by Fast one
Mon Aug 08, 2016 3:17 pm
Forum: Series 1
Topic: Cracks in print and clicking extruder motor
Replies: 9
Views: 4538

Re: Cracks in print and clicking extruder motor

The cracks were caused by using the wrong material, somehow I ordered ABS instead of PLA and sometimes the bottom curled up or didn't stick to the glass for long. The extruder clicking was caused by not enough initial voltage for the motor driver setup, the 0.45 volts wasn't enough to overcome small...
by Fast one
Thu Jul 21, 2016 4:51 pm
Forum: Series 1
Topic: Extruder questions
Replies: 1
Views: 1661

Extruder questions

What is the purpose of both extruder fans and what effect would a weak fan have in either location?
by Fast one
Fri Jul 08, 2016 4:52 pm
Forum: Series 1
Topic: Need extruder stepper motor
Replies: 0
Views: 8456

Need extruder stepper motor

I need to change the extruder stepper motor on a Series 1 2015 model and use the original stepper drivers, is there a source for a replacement, better motor or part number other than Type A Machines? When I looked up the LDO-35STH48-1684A10C motor from the machine on Google, it states that the motor...
by Fast one
Tue Jun 14, 2016 7:02 am
Forum: Projects
Topic: Tool Wall for garage
Replies: 5
Views: 7287

Re: Tool Wall for garage

After two months of use I really like this design, finding the right tool is fast and easy. So far the tape measure has been the most used and no tools have been lost.
by Fast one
Mon Jun 06, 2016 4:38 pm
Forum: Series 1
Topic: Cracks in print and clicking extruder motor
Replies: 9
Views: 4538

Re: Cracks in print and clicking extruder motor

It failed after 25 minutes but the temperature trace was stable with no dropout spikes.
by Fast one
Mon Jun 06, 2016 6:04 am
Forum: Series 1
Topic: Cracks in print and clicking extruder motor
Replies: 9
Views: 4538

Cracks in print and clicking extruder motor

My printer was working great but now large prints fail after an hour or two due to the extruder clicking with no material flowing. A smaller print didn't fail but it has cracks in it from some layers not sticking to each other. One print about the size of a 1" cube came out ok. Does anyone know...
by Fast one
Wed Jun 01, 2016 3:44 pm
Forum: Series 1
Topic: Want spare driver boards
Replies: 3
Views: 1791

Re: Want spare driver boards

Are the TMC-2100 drivers a drop in for my machine? If not what has to be changed?
by Fast one
Sun May 29, 2016 10:25 am
Forum: Series 1
Topic: Want spare driver boards
Replies: 3
Views: 1791

Want spare driver boards

I have a Series 1 (serial # 1393) with the white stepper driver boards and want to buy some spares, where are these available so that the spares will drop in if ever needed without any changes? What is the part number for the white drivers?

Go to advanced search